| |
  |
Fully-bolted
non-metallic pump suitable for aggressive and
hazardous chemicals. Bolted design in
Polypropylene or PVDF prevents leakage to
atmosphere. |
Performance
Criteria :
Capacity : To 900 l/min
Pressure : To
6.9 bar
Temperature : To 100°C
Viscosities : To 25,000 cps
Sizes : ¼” to 3” |
|
Metallic Ball Valve Series |
|
 |
Fully-bolted
metallic pump in either Aluminum, Cast Iron, 316
Stainless Steel, or Alloy C. Pump designed to
guarantee Non-Stalling and comes with 5-year
limited warranty, ensuring performance and
reliability |
|
Performance
Criteria :
Capacity
: To 890 l/min
Pressure
: To 8.9 bar
Temperature : To
150°C
Viscosities : To 25,000 cps
Sizes
: ¼” to 3” |
|
'G'
Gas Pumps Series |
 |
The only diaphragm
pump in the world designed to be driven by
"sweet" natural gas. The pumps are fully
bolted and have a fully ground able strap to
prevent static discharge |
|
Performance
Criteria :
Capacity
: To 890 l/min
Pressure
: To 8.6
bar
Temperature : To 150°C
Viscosities
: To 25,000 cps
Sizes
: ¼” to 3 |
|
|
Sandpiper Spill
Containment Series |
 |
Spill containment pumps provide safer handling
of aggressive or hazardous liquids. Intermediate
chambers are filled with a neutral or compatible
fluid preventing leakage to atmosphere in case
of primary diaphragm failure. Leakage detection
available |
|
Performance
Criteria :
Capacity : To 890 l/min
Pressure : To 8.6 bar
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : ¼” to 3” |
|
|
SA Flap Valve Metallic
Series |
 |
Flap valve pumps are especially recommended for
slurries and liquids with suspended solids. Flap
valves allow passage of line-size solids without
damage of solid or pump shafts |
|
Performance
Criteria :
Capacity : To 988 l/min
Pressure : To 8.6
bar
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : ¼” to 4” |
|
| |
 |
Special-built ball
valve pump providing superior suction lift
capabilities. Pump ideal for all liquids thin or
thick, even small solids. Special porting
available |
|
Performance
Criteria :
Capacity : To 988 l/min
Pressure : To 8.6 bar
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : ¼” to 3” |
|
| |
 |
Waste treatment pumps are specially fitted with
swing check valves and easy access clean-outs. The
pumps are designed specifically for slurry and
solids-laden materials
|
|
Performance
Criteria :
Capacity : To 988 l/min
Pressure : To 8.6 bar
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : ¼” to 4” |
|
|
High-Pressure Duty Metallic
Series |
| |
These air-powered, single diaphragm metallic pumps
deliver discharge pressure twice the inlet
pressure, up to 17.2 bar. Designed specifically
for filter press feed or similar applications
requiring high discharge pressures. |
|
Performance
Criteria :
Capacity : To 988 l/min
Pressure : To 8.6 bar
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : ¼” to 4” |
|
| |
| |
UL Series pumps are designed to meet UL79
standards for diaphragm pumps handling
flammable liquids, such as fuels and oils.
Fully groundable to prevent static discharge |
|
Performance
Criteria :
Capacity : To 170l/min
Pressure : To 8.6m
Temperature : To 150°C
Viscosities : To 25,000 cps
Sizes : 1” |
|
| |
| |
The Porta Pump
submersible, battery-powered pump operates
using any 12-volt car or truck battery.
Extremely portable, weighing at 15 kgs
and can fit through small openings |
|
Performance
Criteria :
Capacity : To 163l/min
Pressure : To 7.6m
Temperature : To 40°C
Viscosities : To 50 cps
Sizes : 11/2” |
|
